Drop-In Liners
TIVAR® 88 liners can be manufactured as drop-in liners for smaller hoppers and bins. Using drop-in liners allows installation to be completed quickly; significantly reducing or eliminating attachment fasteners. Available access is the key to utilizing this type of lining approach.
Get a Quote NowPre-Engineered & Fabricated Liner Kits
TIVAR® 88 liners can be pre-engineered and fabricated to the application and geometric profiles of bins, bunkers and hoppers. We can offer application recommendations, design details, pre-fabricated components, attachment fasteners, and installation instructions.
Get a Quote Now
Oversized Butt Welded Panels
TIVAR® 88-2 is a butt weldable grade of material, with a silicone additive for enhanced surface lubricity. Butt welding allows for TIVAR® 88-2 to be produced in customized shapes and panel sizes. Oversized butt welded panels can reduce installation time, the quantity of attachment fasteners, and connection seams. In certain applications the operating performance of the liners can be improved through the elimination of fasteners and seams.
Get a Quote NowStructural Steel Framework with TIVAR® 88 Substrate
Design options with TIVAR® 88 can be expanded through the use of a structural steel support framework. This approach eliminates the base metal substrate. Seams and joints can be butt or extrusion welded to produce a powder tight seal. Contamination of bulk materials from base metal contact can be eliminated, as well as the elimination of base metal corrosion.
Get a Quote Now
Fabricated Chutes, Hoppers and Transitions from TIVAR® 88
TIVAR® 88-2 is a butt weldable grade of material, with a silicone additive for enhanced surface lubricity. Butt welding allows for TIVAR® 88-2 to be produced in customized shapes and panel sizes. Oversized butt welded panels can reduce installation time, the quantity of attachment fasteners, and connection seams. In certain applications the operating performance of the liners can be improved through the elimination of fasteners and seams.
Get a Quote NowTIVAR® 88-2 Tubing
TIVAR® 88-2 tubing can be used for gravity discharge applications of dry bulk materials, spiral helix conveyors, and wet slurries. Flanges can be attached by spin welding or extrusion welding. Existing steel pipes can also be lined with TIVAR® 88-2 tubing, for applications such as standpipes and down comers.
Get a Quote Now
TIVAR® 88 T & H Profiles
nstalling TIVAR® 88 liners the vertical seams between panels can be joined with either TIVAR® 88 "T" or "H" profiles. These profiles allow for linear thermal expansion of the material, they protect the base substrate from contact with bulk materials, all while serving as an effective liner attachment system.
Get a Quote NowTIVAR® 88 Mechanical Fasteners
A full complement of mechanical fasteners is available for attaching TIVAR® 88 liners. Fastening systems can be either a style that is through bolt or non-through bolt, depending on access and project requirements. Counter bore tools, cover plugs, and drive tools are available with each fastener attachment system.
Get a Quote Now
Leading Edge Protectors
Preformed steel, stainless steel, and aluminum leading edge protectors are available for completing successful TIVAR® 88 installations. The top perimeter of every lining system should be capped or sealed with a leading edge protector. This will prevent bulk materials from migrating behind the liner panels.
Get a Quote Now